Barriers and Strategies for the Digital Transformation of SME Supply Chains
https://doi.org/10.52821/2789-4401-2026-4-112-127
Abstract
The article is devoted to the study of barriers to the digitalization of supply chains and mechanisms for overcoming them in small and medium-sized businesses.
Purpose. The aim of the work is to identify, systematize and compare the barriers preventing the introduction of digital technologies in small and medium-sized enterprises and large companies based on bibliometric and systematic analysis of scientific literature.
Methodology. The study is based on the application of a bibliometric and systematic review of scientific literature aimed at identifying and analyzing barriers to the digitalization of supply chains, as well as strategies for overcoming them in small and medium-sized enterprises and large companies. The selection of publications was carried out in the Scopus database according to predefined inclusion and exclusion criteria. The final sample included 76 peer-reviewed scientific papers, the results of which were subjected to comparative analysis.
Originality / value. The originality of the research lies in the development of an integrative model of digital transformation of supply chains based on the generalization of the results of the analysis of scientific sources. The proposed model takes into account the impact of enterprise size on digitalization processes and fills the existing gap in the literature associated with insufficient knowledge of the differences between small and medium-sized enterprises and large companies. The practical value of the research is to identify the features of digital technology implementation strategies and mechanisms for overcoming barriers to digitalization in organizations of various scales.
Findings. Found that small and medium-sized manufacturing enterprises face more pronounced barriers to the digitalization of supply chains compared to large corporations. Six categories of barriers have been identified: financial, technological, organizational, strategic, regulatory, and human capital-related, the intensity of which varies significantly depending on the scale of the enterprise. It is shown that the geographical location and the level of development of the institutional environment are significant contextual factors determining the results of transformation.
About the Authors
A. DikhanbekovaKazakhstan
Dikhanbekova Aigerim Meirambekkyzy, The main author, PhD Candidate in Management,
Almaty.
S. Umirzakov
Kazakhstan
Umirzakov Samazhan Yntykbayevich – Doctor of Economic Sciences, Professor,
Almaty.
References
1. Samuels, A. (2025). Digital transformation in supply chains: Improving resilience and sustainability through AI, blockchain, and IoT. Frontiers in Sustainability, 6 , Article 1584580. https://doi.org/10.3389/frsus.2025.1584580
2. Hariyani, D., Hariyani, P., Mishra, S., & Choudhary, S. (2026). Key enabling constructs and performance outcomes of an integrated sustainable green lean six sigma agile manufacturing system in Indian manufacturing organizations. Benchmarking: An International Journal . Advance online publication. https://doi.org/10.1108/BIJ-02-2026-0121
3. Ghobakhloo, M., Fathi, M., Iranmanesh, M., et al. (2021). Industry 4.0 ten years on: A bibliometric and systematic review of concepts, sustainability value drivers, and success determinants. Journal of Cleaner Production, 302 , Article 127052. https://doi.org/10.1016/j.jclepro.2021.127052
4. Machado, C. G., Winroth, M. P., & Ribeiro da Silva, E. H. D. (2021). Sustainable manufacturing in Industry 4.0: An emerging research agenda. International Journal of Production Research, 58 (5), 1462–1484. https://doi.org/10.1080/00207543.2019.1652777
5. Alquraish, M. (2025). Digital transformation, supply chain resilience, and sustainability: A comprehensive review with implications for Saudi Arabian manufacturing. Sustainability, 17 (10), Article 4495. https://doi.org/10.3390/su17104495
6. Werheid, J., Behnen, H., Woltersmann, J.-H., He, S., Hamann, T., Abdelrazeq, A., & Schmitt, R. H. (2025). Machine vision in manufacturing SMEs: A review. Discover Applied Sciences, 7 , Article 371. https://doi.org/10.1007/s42452-025-06923-4
7. Borana, N., Gaur, T. S., & Yadav, V. (2026). Modeling of barriers to digital transformations in Indian manufacturing small and medium-sized enterprises. Journal of Science and Technology Policy Management, 17 (1), 100–117. https://doi.org/10.1108/JSTPM-10-2023-0175
8. Dixit, A., Jakhar, S. K., & Kumar, P. (2023). Does lean and sustainable manufacturing lead to Industry 4.0 adoption: The mediating role of ambidextrous innovation capabilities. Technological Forecasting and Social Change, 175 , Article 121328. https://doi.org/10.1016/j.techfore.2021.121328
9. Ghobakhloo, M., & Iranmanesh, M. (2021). Digital transformation success under Industry 4.0: A strategic guideline for manufacturing SMEs. Journal of Manufacturing Technology Management, 32 (8), 15331556. https://doi.org/10.1108/JMTM-11-2020-0455
10. Raj, A., Dwivedi, G., Sharma, A., et al. (2020). Barriers to the adoption of Industry 4.0 technologies in the manufacturing sector: An inter-country comparative perspective. International Journal of Production Economics, 224 , Article 107546. https://doi.org/10.1016/j.ijpe.2019.107546
11. Mäntymäki, M., Minkkinen, M., Birkstedt, T., & Viljanen, M. (2022). Defining organizational AI governance. AI and Ethics, 2 , 603–609. https://doi.org/10.1007/s43681-022-00143-x
12. Jamwal, A., Agrawal, R., Sharma, M., & Giallanza, A. (2021). Industry 4.0 technologies for manufacturing sustainability: A systematic review and future research directions. Applied Sciences, 11 (12), Article 5725. https://doi.org/10.3390/app11125725
13. Alayón, C. L., Säfsten, K., & Johansson, G. (2022). Barriers and enablers for the adoption of sustainable manufacturing by manufacturing SMEs. Sustainability, 14 (4), Article 2364. https://doi.org/10.3390/su14042364
14. Setiawan, B., Pamungkas, B., Mekaniwati, A., & Kusuma, P. M. (2025). The strategic role of digital transformation, dynamic and agile capabilities for the performance of micro, small, and medium enterprises (MSMEs). The Bottom Line, 38 (2), 130–153. https://doi.org/10.1108/BL-08-2024-0120
15. Brodeur, J., Pellerin, R., & Deschamps, I. (2022). Operationalization of critical success factors to manage the Industry 4.0 transformation of manufacturing SMEs. Sustainability, 14 (14), Article 8954. https://doi.org/10.3390/su14148954
16. Kamble, S. S., Gunasekaran, A., & Gawankar, S. A. (2022). Achieving sustainable performance in a data-driven agriculture supply chain: A review for research and applications. International Journal of Production Economics, 219 , 179–194. https://doi.org/10.1016/j.ijpe.2019.05.022
17. Hangl, J., Behrens, V. J., & Krause, S. (2022). Barriers, drivers, and social considerations for AI adoption in the supply chain: A tertiary study. Logistics, 6 (3), Article 63. https://doi.org/10.3390/logistics6030063
18. Luthra, S., & Mangla, S. K. (2018). Evaluating challenges to Industry 4.0 initiatives for supply chain sustainability in emerging economies. Process Safety and Environmental Protection, 117 , 168–179. https://doi.org/10.1016/j.psep.2018.04.018
19. Singh, S., Sharma, M., & Dhir, S. (2024). Modeling the effects of digital transformation in Indian manufacturing industry. Technology in Society, 67 , Article 101763. https://doi.org/10.1016/j.techsoc.2021.101763
20. Reza-Gharehbagh, R., Asian, S., Hafezalkotob, A., & Wei, C. (2021). Reframing supply chain finance in an era of reglobalization: On the value of multi-sided crowdfunding platforms. Transportation Research Part E: Logistics and Transportation Review, 149 , Article 102298. https://doi.org/10.1016/j.tre.2021.102298
21. Bhattacharya, A., & Chatterjee, P. (2022). Legacy systems integration challenges in digital supply chains. Computers & Industrial Engineering, 168 , Article 108051. https://doi.org/10.1016/j.cie.2022.108051
22. Karamchandani, A., Srivastava, S. K., & Srivastava, R. K. (2020). Perception-based model for analyzing the impact of enterprise blockchain adoption on SCM. International Journal of Information Management, 52 , Article 102019. https://doi.org/10.1016/j.ijinfomgt.2019.10.004
23. Nagariya, R., Kumar, D., & Kumar, I. (2021). Service supply chain: From bibliometric analysis to content analysis, current research trends and future research directions. Benchmarking: An International Journal, 28 (1), 333–369. https://doi.org/10.1108/BIJ-04-2020-0137
24. Ge, D., & Bao, Z. (2024). Data silos and digital fragmentation in supply chain management. International Journal of Production Research, 62 (5), 1688–1705. https://doi.org/10.1080/00207543.2023.2241513
25. Pizzichini, L., Temperini, V., & Gregori, G. L. (2025). Digital transformation pathways in Italian manufacturing SMEs. Journal of Small Business Management, 63 (2), 512–538. https://doi.org/10.1080/00472778.2023.2268712
26. Tsolakis, N., Niedenzu, D., Simonetto, M., et al. (2021). Supply network design to address United Nations Sustainable Development Goals: A case study of blockchain implementation in Thai fish industry. Journal of Business Research, 131 , 495–519. https://doi.org/10.1016/j.jbusres.2020.08.003
27. Bogers, M., Zobel, A.-K., Afuah, A., & Almirall, E. (2017). The open innovation research landscape: Established perspectives and emerging themes. Industry and Innovation, 24 (1), 8–40. https://doi.org/10.1080/13662716.2016.1240068
28. Bag, S., Gupta, S., & Luo, Z. (2021). Examining the role of logistics 4.0 enabled dynamic capabilities on firm performance. The International Journal of Logistics Management, 32 (2), 349–376. https://doi.org/10.1108/IJLM-11-2019-0311
29. Feng, H., Wang, X., Duan, Y., Zhang, J., & Zhang, X. (2020). Applying blockchain technology to improve agri-food traceability: A review. Journal of Cleaner Production, 260 , Article 121031. https://doi.org/10.1016/j.jclepro.2020.121031
30. Del Giudice, M., Scuotto, V., Papa, A., & Tarba, S. Y. (2021). A self-tuning model for smart manufacturing SMEs. Journal of Product Innovation Management, 38 (1), 68–90. https://doi.org/10.1111/jpim.12560
31. Bui, T. D., Tsai, F. M., Tseng, M.-L., et al. (2024). Knowledge management and digital twin in supply chain transformation. Resources, Conservation and Recycling, 202 , Article 107364. https://doi.org/10.1016/j.resconrec.2023.107364
32. Nguyen, T. H., Le, N. T., & Pham, H. T. (2025). Owner-manager resistance to digital adoption in Vietnamese manufacturing SMEs. Asia Pacific Journal of Management, 42 (1), 211–238. https://doi.org/10.1007/s10490-023-09918-z
33. Shahzad, K., Takala, J., Ali, T., & Sillanpaa, I. (2024). Big data analytics and supply chain performance: The role of organizational ambidexterity. International Journal of Production Economics, 261 , Article 108889. https://doi.org/10.1016/j.ijpe.2023.108889
34. Li, Z. (2025). Navigating digital transformation: A risk-based approach for Industry 4.0 innovation. Journal of the Knowledge Economy, 16 , 9715–9751. https://doi.org/10.1007/s13132-024-02264-6
35. Atieh, A. M., Ghaith, M., & Alazzam, M. (2023). Digital supply chain challenges in developing economies. International Journal of Supply Chain Management, 12 (1), 45–59. https://doi.org/10.17705/2msqe.00063
36. Dehkhodaei, M., Rahmani, M., & Zare, A. (2023). Regulatory barriers to digital supply chain adoption in emerging markets. Journal of Enterprise Information Management, 36 (4), 1102–1124. https://doi.org/10.1108/JEIM-03-2022-0095
37. Shah, S. A. A., Doreen, A., & Sultan, F. (2024). Digital supply chain transformation challenges in developing economies. Journal of Global Information Management, 32 (1), Article E245601. https://doi.org/10.4018/JGIM.335022
38. Borovkov, A., Ryabov, Y., Maruseva, V., & Kukushkin, K. (2021). New Industry 4.0 advanced manufacturing ecosystem. International Journal of Production Research, 59 (21), 6521–6539. https://doi.org/10.10 80/00207543.2021.1913166
39. Dossou, P.-E., Nachidi, M., & Lbath, R. (2022). Digital transformation of food supply chains: Traceability and sustainability. Procedia Manufacturing, 55 , 584–591. https://doi.org/10.1016/j.promfg.2021.02.086
40. Sawangwong, P., & Chaopaisarn, P. (2021). Readiness assessment for implementing digital supply chain management for SMEs. Journal of Asia Business Studies, 15 (4), 619–640. https://doi.org/10.1108/JABS-05-2020-0196
41. Machado, E. A., Scavarda, L. F., Caiado, R. G. G., & Santos, R. S. (2024). Industry 4.0 and sustainability integration in the supply chains of micro, small, and medium enterprises through people, process, and technology within the triple bottom line perspective. Sustainability, 16 (3), Article 1141. https://doi.org/10.3390/su16031141
42. Baycik, N. H., & Gowda, S. (2023). Low-code digital solutions for SME supply chain integration. Supply Chain Management: An International Journal, 28 (3), 412–428. https://doi.org/10.1108/SCM-05-2022-0207
43. Gupta, S., & Jagtap, S. (2024). Internet access and organizational barriers to digital transformation in SMEs. Technovation, 132 , Article 102980. https://doi.org/10.1016/j.technovation.2024.102980
44. Nazam, M., Hussain, M., Xu, J., & Hashim, M. (2022). Fuzzy AHP-TOPSIS framework for sustainable supply chain risk management. Sustainability, 14 (1), Article 247. https://doi.org/10.3390/su14010247
45. Ibn-Mohammed, T., Mustapha, K. B., Godsell, J., et al. (2025). Regulatory uncertainty and digital supply chain transformation in emerging economies. Journal of Business Research, 172 , Article 114421. https://doi.org/10.1016/j.jbusres.2023.114421
46. Alshahrani, S. T. (2023). Industry 4.0 in “major emerging markets”: A systematic literature review of benefits, use, challenges, and mitigation strategies in supply chain management. Sustainability, 15 (20), Article 14811. https://doi.org/10.3390/su152014811
Review
For citations:
Dikhanbekova A., Umirzakov S. Barriers and Strategies for the Digital Transformation of SME Supply Chains. Central Asian Economic Review. 2026;1(4):112-127. https://doi.org/10.52821/2789-4401-2026-4-112-127
JATS XML














